ICANEWS

Engineering & Technology

Exposure-Time-Aligned Primary-Path Architecture for Autonomous Driving ECUs

This paper introduces an architectural design for autonomous driving Electronic Control Units (ECUs) intended for a transitional period where production vehicle

Overview

This paper introduces an architectural design for autonomous driving Electronic Control Units (ECUs) intended for a transitional period where production vehicles utilize modular multi-neural network (NN) pipelines. The proposed architecture supports the parallel operation of both a modular pipeline and an end-to-end (E2E) path, facilitating a staged migration towards E2E autonomous driving.

Research Context

While end-to-end autonomous driving is identified as the dominant research direction, current production vehicles continue to rely on modular multi-NN pipelines. The presented architecture addresses the challenge of integrating these two approaches within a single system, particularly in the context of production System-on-Chips (SoCs).

The research notes that an "egalitarian late fusion" approach, when transplanted to a production SoC, can be computationally inefficient and lacks a natural unit for the staged substitution of E2E components.

Approach

The proposed architecture is based on three design principles:

  • Primary-Path: This principle involves explicitly selecting a primary perception chain. The enclosure of this primary chain within a single SoC pair is prioritized over non-critical paths.
  • Exposure-Time-Aligned: This principle propagates the primary sensor's exposure time, denoted as $\tau_{\rm \exp}$, as a tag throughout the processing chain. Fusion nodes are event-driven based on matched $\tau_{\rm \exp}$ values rather than operating on a fixed cycle.
  • Co-Path Coexistence: Building upon the first two principles, this allows an E2E output path to run concurrently with the modular pipeline within the same $\tau_{\rm \exp}$ cycle.

The implementation of this architecture is described for a Dual-SoC production Autonomous Driving ECU.

Findings

On a Dual-SoC production AD-ECU, the implementation of the proposed architecture:

  • Closed the camera-shutter to planner-output latency at a mean of 296 milliseconds.
  • Achieved this latency within a 350-millisecond design budget.

Under the 'Co-Path Coexistence' principle, the modular pipeline functions as the primary system at the production launch. The E2E path operates as a shadow system on real vehicles during this phase. As evaluation evidence accumulates, the scope of the E2E path is designed to be expanded.

Key Findings